U.S. Atlantic Fleet, Commander in Chief SUPERVISORY ELECTRICAL ENGINEER in Kittery, Maine
About the Agency
The selectee for this position will serve as a Supervisory Electrical Engineer in the Electrical/Electronics Engineering and Planning Division in the Engineering and Planning Department, Portsmouth Naval Shipyard, Kittery, Maine.
The successful selectee will perform the following duties:
- Plans work to be accomplished, sets priorities, prepares schedules and assign work.
- Coordinates emerging problems and projects with the appropriate Ship Superintendents, Project Managers, Ship's Force Commanding Officers and Shop Heads to facilitate the orderly performance of work associated problems related to Shipyard processes.
- Provides both technical and administrative supervision over technicians and engineers.
- Prepares and issues detailed manning requirement schedules for planning and executing assigned availabilities.
- Represents his/her Branch at all pre-planning meetings and conferences.
- Not Required
Who May Apply
This job is open to…
Current Permanent Competitive Service Department of the Navy Employees, DOD Tenant Activities of the Portsmouth Naval Shipyard, Kittery, ME, People with Disabilities, VEOA, and ICTAP
Questions? This job is open to 3 groups.
- Must be a US Citizen.
- Males must be registered or exempt from Selective Service. www.sss.gov
- Must be determined suitable for federal employment.
- Must participate in the direct deposit pay program.
- May be required to successfully complete a probationary/trial period.
- See Other Information and Requirements section for additional requirements.
In order to qualify for this position, your resume must provide sufficient experience and/or education, knowledge, skills, and abilities to perform the duties of the specific position for which you are being considered. Your resume is the key means we have for evaluating your skills, knowledge, and abilities as they relate to this position. Therefore, we encourage you to be clear and specific when describing your experience.
Applicants must meet the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Applicants must possess Successful completion of a professional engineering degree. To be acceptable, the curriculum must: (1) lead to a bachelor's degree in a school of engineering with at least one curriculum accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineering curriculum; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics; or electronics.
Current registration as an Engineer Intern (EI), Engineer in Training (EIT) , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org.
Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.
Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under in the first option for meeting the Basic Education Requirement. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in in the first option for meeting the Basic Education Requirement.
Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, (e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology) may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. NOTE: If you qualify under this option, you must provide a copy of your engineering training plan, OR identify where in your resume you've documented several years of prior professional engineering type experience. Additionally, you must indicate where you worked and the name of your supervisor when you gained your professional engineering experience acquired under professional engineering supervision and guidance.
In addition to the Basic Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-12grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following:
- Experience applying the theories, concepts, principles and practices of mechanical and electrical engineering.
- Experience in planning work to be accomplished, setting priorities, preparing schedules, assigning work and setting performance standards.
- Experience managing and providing technical advice, guidance, and direction to lower grade engineers/technicians and other ship's force personnel.
Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=GS-PROF.
You will receive credit for all qualifying experience, including volunteer and part time experience. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.
Education completed in foreign colleges or universities may be used to meet the qualification requirements if the applicant can provide documentation indicating that the foreign education is comparable to that received in an accredited educational institution in the United States. It is the responsibility of the applicant to provide such evidence when applying for further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html.
See the Office of Personnel Management's General Policies for information on crediting education.
Generally, current Federal employees applying for GS jobs must serve at least one year at the next lower grade level. This requirement is called time-in-grade. All qualifications and time-in-grade requirements must be met by the closing date of this announcement and clearly documented in your resume.
Must be able to obtain an interim and final Secret security clearance prior to entrance on duty AND must be able to maintain the required level of clearance while employed in the subject position. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
Overtime, Shift, Weekend and Holiday work may be required as needed.
What To Expect Next
When the application process is complete, your application will be reviewed to determine if you meet the hiring eligibility and qualification requirements for which you requested consideration. You will be rated based on the information provided in your resume and responses to the questionnaire, along with your supporting documentation to determine your level of knowledge, skill, and ability related to the job requirements.
Best qualified applicants will be referred to the hiring manager. The hiring manager may choose to conduct interviews. Once the selection is made, you will receive a notification of the decision.
Stay informed of changes to your application status by signing up for automatic email alerts at https://www.usajobs.gov/Applicant/Application/ListApplications.
Review our benefits
This position is covered by the Department of Defense Priority Placement Program.
Additional vacancies may be filled by this announcement.
A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.
The Department of the Navy uses E-Verify to confirm the employment eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, visit www.dhs.gov/E-Verify.
If you are unable to apply online and request information about the Alternate Application process, please contact the Department of Navy's Employment Information Center.
Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf
ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating of 85 or higher. For more information about ICTAP eligibility please review the following link: https://www.usajobs.gov/Help/working-in-government/unique-hiring-paths/federal-employees/ictap/
This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/GetJob/ViewDetails/474367000. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
Open & closing dates: 2017-07-17 to 2017-07-24
Salary: $94,520 to $122,875 / per year
Pay scale & grade: GS 13
Series: 0850 Electrical Engineering
Appointment type: Permanent
Work schedule: Full-Time
Job announcement number: ST-10025385-17-DDH
Control number: 474367000